The Acs-8910 Configuration Menu; Quick Setup Menu - Accusys ACS-8910 User Manual

Table of Contents

4.3 The ACS-8910 Configuration Menu

The ACS-8910 should be disconnected from the host system when running the Configuration Menu.

The Main Menu consists of 6 categories. Each category is used to configure a different part of the

ACS-8910 controller. The following shows the main menu categories. Each category has sub-menu

and options. In the following sections, each main hierarchy will be described in details.

The Quick Setup menu, which provides a quickly RAID level 5 configuration. On the other hand,

all the installed disks will be configured to RAID level 5.

Sub-menu

01 Quick Setup

Description:

Sub-menu

011 Reconfim

Description:

Main Menu

0 Quick Setup

1 RAID Params

2 SCSI Params

3 RS232 Params

4 System Params

5 NVRAM

6 RAID Func

7 Special

Settings

No, Yes

This procedure will provide a quickly way to setup a RAID

5 configuration.

NOTE 1:

You will change to new setup if RAID old

configuration has exited.

NOTE 2: The original data will be lost if you execute

this quick setup.

Settings

No, Yes

Re-confirm Quick Setup procedures.

NOTE: The RAID controller will re-start automatically

after pressing "Yes" from Re-confirm menu

Default setting

Table of Contents