Paradyne Hotwire 8775 User Manual page 80

A. Configuration Options
Table A-5. Telnet Session Options (2 of 2)
A-10
Inactivity Timeout
Possible Settings: Enable, Disable
Default Setting: Disable
Provides automatic logoff of a Telnet session.
T
Inactivity Timeout is not available if the unit is in a DSLAM running in
IP Conservative mode; this option is forced to Enable.
Enable – The Telnet session terminates automatically after the Disconnect Time.
Disable – A Telnet session will not be closed due to inactivity.
Disconnect Time (Minutes)
Possible Settings: 1 – 60
Default Setting: 5
Number of minutes of inactivity before a Telnet session terminates automatically.
Timeout is based on no keyboard activity.
T
Disconnect Time (minutes) appears when Inactivity Timeout is enabled. It does not
appear when the unit is connected to a DSLAM card running in IP Conservative
mode.
1 – 60 – The Telnet session is closed after the selected number of minutes.
February 2001 8700-A2-GB25-10