Hotwire 8800 Or 8810 Dslam - Paradyne Hotwire 8775 User Manual

C. Cables and Pin Assignments
50-Pin Telco Connector Pinouts for Model 8775 in a

Hotwire 8800 or 8810 DSLAM

The three 50-Pin Telco connectors on the front of the Hotwire 8800 or 8810
DSLAM Interface Module (labeled SLOTS 1–6, SLOTS 7–12, and
SLOTS 13–18) provide the 2-wire loop interface from each DSL port to the MDF.
The following table lists the pin assignments for each of these interfaces. Note that
Pins 25 and 50 are not used.
Table C-3. 8800 and 8810 SLOTS Connector Pinouts
C-4
SLOTS 1–6 SLOTS 7–12
Card, Port Card, Port
Card 1, Port 1 Card 7, Port 1
Card 1, Port 2 Card 7, Port 2
Card 1, Port 3 Card 7, Port 3
Card 1, Port 4 Card 7, Port 4
Card 2, Port 1 Card 8, Port 1
Card 2, Port 2 Card 8, Port 2
Card 2, Port 3 Card 8, Port 3
Card 2, Port 4 Card 8, Port 4
Card 3, Port 1 Card 9, Port 1
Card 3, Port 2 Card 9, Port 2
Card 3, Port 3 Card 9, Port 3
Card 3, Port 4 Card 9, Port 4
Card 4, Port 1 Card 10, Port 1
Card 4, Port 2 Card 10, Port 2
Card 4, Port 3 Card 10, Port 3
Card 4, Port 4 Card 10, Port 4
Card 5, Port 1 Card 11, Port 1
Card 5, Port 2 Card 11, Port 2
Card 5, Port 3 Card 11, Port 3
Card 5, Port 4 Card 11, Port 4
Card 6, Port 1 Card 12, Port 1
Card 6, Port 2 Card 12, Port 2
Card 6, Port 3 Card 12, Port 3
Card 6, Port 4 Card 12, Port 4
February 2001
SLOTS 13–18 Connector Pins
Card, Port (Tip, Ring)
Card 13, Port 1 1, 26
Card 13, Port 2 2, 27
Card 13, Port 3 3, 28
Card 13, Port 4 4, 29
Card 14, Port 1 5, 30
Card 14, Port 2 6, 31
Card 14, Port 3 7, 32
Card 14, Port 4 8, 33
Card 15, Port 1 9, 34
Card 15, Port 2 10, 35
Card 15, Port 3 11, 36
Card 15, Port 4 12, 37
Card 16, Port 1 13, 38
Card 16, Port 2 14, 39
Card 16, Port 3 15, 40
Card 16, Port 4 16, 41
Card 17, Port 1 17, 42
Card 17, Port 2 18, 43
Card 17, Port 3 19, 44
Card 17, Port 4 20, 45
Card 18, Port 1 21, 46
Card 18, Port 2 22, 47
Card 18, Port 3 23, 48
Card 18, Port 4 24, 49
8700-A2-GB25-10