If you specified No (the default) in the Immediately Apply Download field in Step 3,
you must apply the download.
Procedure
To apply the downloaded firmware:
8700-A2-GB25-10
main/control/apply_download
Switch To Code Revision A01.00.02: No
An answer of "yes" will cause the system
to reset as if it had been powered off and on!
-------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
Select: Yes, No
1. Press the Escape key to return to the Control menu. Select Apply Download.
2. On the Apply Download screen, type Yes to reset the card and activate
the code.
Selecting Yes causes the termination unit to reset.
NOTE:
The unit has two flash memory banks to hold executable firmware. You can
switch between these two firmware versions by applying the firmware listed
on the Apply Download screen.
February 2001
3. Initial Startup and Configuration
APPLY DOWNLOAD
WARNING:
LOS at Net, Pt 1
Hotwire
Model: 87x5
MainMenu
Exit
3-9