Standards Compliance for SNMP Traps
SNMP Traps
This section describes the unit's compliance with SNMP standards and any
special operational features for the SNMP traps supported. The unit supports the
following traps:
T
T
T
warmStart
authenticationFailure
8700-A2-GB25-10
warmStart
authenticationFailure
linkUp and linkDown
SNMP Trap
Description
warmStart
The unit has reinitialized
itself.
The trap is sent after the unit
resets and stabilizes.
There are no
variable-bindings.
SNMP Trap
Description
authenticationFailure
Failed attempts to access
the unit.
There are no
variable-bindings.
February 2001
B
Possible Cause
T
Reset command.
T
Power disruption.
Possible Cause
Three unsuccessful attempts were
made to enter a correct
login/password combination.
B-1