Kettler KN170 PD Series Translation Of Original Operating Instructions page 168

6.20.2.1 Using SR Suntour high-speed compression damping
A high speed is generated in the suspension fork,
e.g. on a mogul slope or during landing after a
jump.
Figure 164: High-speed movements
R2C2-PCS
R2C2
RC2
RC2-PCS
1
Table 52: High-speed lever (1) on the crown on the SR
Suntour suspension fork
MY24K12 - 13_1.0_01.02.2024
The settings on the high-speed damper control
the suspension behaviour of the fork during
• stronger impacts
• small, rapid impacts (e.g. stairs or mogul slopes)
• landings after quick, successive jumps.
 Turn high-speed lever
clockwise gradually.
 The high-speed compression damper is placed
in a harder setting.
 Gradually turn high-speed lever
crown anticlockwise.
 The high-speed compression damper is placed
in a softer setting.
Operation
(1) on the crown
(1) on the
168