Table of Contents
Advertisement
6.15.5.1 Adjusting the SR SUNTOUR rear frame damper 2C compression damper
Only applies to pedelecs with this equipment
CAUTION
!
Crash caused by damaged rear frame damper
The rear frame damper can be damaged if it is
compressed under high stress load. This may
lead to an accident with injuries.
Never place the rear frame damper in the hard
[FIRM] setting on rough terrain or when the
suspension is under heavy load.
The SR SUNTUR EDGE plus 2CR rear frame
dampers have a 2C compression damper with two
settings: OPEN and FIRM.
Soft setting [OPEN]
The compression damping is reduced in the
OPEN setting. The fluid flows easily through the
Terrain
Rough downhill riding
Smooth downhill riding
Technical uphill riding
Smooth ascent
Sandy downhill riding
Sandy uphill riding
Muddy downhill riding
Muddy uphill riding
Set the compression lever (rear frame
damper) to either the soft setting [OPEN] or the
hard setting [FIRM].
MY24K12 - 13_1.0_01.02.2024
damper circuit. As a result, the rear frame damper
responds with maximum sensitivity to the ground.
The OPEN setting is suitable for light riders or for
dry, dusty terrain where maximum traction is
required.
Hard setting [FIRM]
The FIRM setting does not lock out the rear frame
damper. However, the FIRM setting provides
significant resistance to weight and deflection
caused by pedal movement.
The FIRM setting is ideal when pedalling in a
standing position to reduce unwanted oscillation
or when riding downhill where maximum
assistance is required.
Setting
OPEN
×
×
×
×
EDGE LOR8
Table 46: Compression lever (rear frame damper) (1) on
the EDGE plus 2CR rear frame damper.
Operation
FIRM
×
×
×
×
1
158
Advertisement
Table of Contents
