Nameplate - Kettler KN170 PD Series Translation Of Original Operating Instructions

3.4

Nameplate

The nameplate is situated on the frame. The
precise position of the nameplate is shown in
Figure 3.
Figure 3: Example KETTLER nameplate
No. Designation
1 CE marking
2 Manufacturer
3 Type number
4 Maximum continuous power rating
Maximum permitted total weight
5
(PTW)
6 Year of manufacture
7 Pedelec type
8 Safety markings
9 Disposal instructions
10 Area of use
Weight of the ready-to-ride pedelec
11 (optional; only for pedelecs 25 kg or
more)
12 Shut-off speed
Table 13: Explanation of information on the nameplate
MY24K12 - 13_1.0_01.02.2024
KETTLER
Alu-Rad GmbH
Longericher Str. 2
50739 Köln, Germany
3
KB085-xxFW
EPAC
nach
EN 15194
4 0,25 kW / 25 km/h
zGG 150 kg
5
EPAC 25 kg
BJ 2022
6
7
8
Description
The CE marking is a declaration by the manufacturer that the pedelec
complies with applicable requirements.
You can contact the manufacturer at the address indicated.
All pedelec models have a nine-digit type number, which is used to
specify the design model year, the type of pedelec and the version.
The maximum continuous power rating is the greatest possible power
for the electric motor output shaft over 30 minutes.
The maximum permitted total weight is the weight of the fully
assembled pedelec with the body weight plus the baggage.
The year of manufacture is the year in which the pedelec was
manufactured.
Each pedelec is assigned a pedelec type, which determines its
proper use, function and area of use.
Safety markings warn of hazards.
Follow the guidelines on waste disposal when disposing of the
pedelec.
Ride pedelec in permitted locations only.
The weight of the ready-to-ride pedelec is specified as a weight of
25 kg or above and refers to its weight at the time of purchase. Any
extra accessories need to be added to the weight.
The speed that the pedelec reaches at the moment when the current
has dropped to zero or to the no-load current value.
The nameplate contains up to twelve pieces of
information.
Typ:
Overview
2
1
12
11
10
9
More information
Appendix
Section 1.1
Section 1.6
Section 3.1.3
Section 3.1.1
Section 2.7
Section 10.1
Section 3.1.5
Section 4.1
25