Kettler KN170 PD Series Translation Of Original Operating Instructions page 140

Menu Submenu
→
→
Errors
About
Table 42: Basic structure of FIT menu and sub-menu
Setting the language
The menus can be set to the required language.
1 Open the S E TT INGS ME NU.
2 Open <Localization><Language>.
3 Follow the instructions on the display.
 All menus are now displayed in the selected
language.
Adjusting the clock
The clock can be adjusted.
1 Open the S E TT INGS ME NU.
2 Open <Localization>< Time>.
3 Press on the plus button and minus button to
set the current time in minutes and hours.
4 Press the navigation rocker switch.
 You now exit the menu. The time you entered
is now saved.
 Press CANCE L on the display screen if you
do not wish to adjust the clock.
 You now exit the menu. The time you entered
will not be saved.
Setting the date
The date can be adjusted.
1 Open the S E TT I NGS ME NU.
2 Open <Localization><Date>.
3 Press the plus button and minus button to set
the current date with the day and month.
4 Press the navigation rocker switch.
 You now exit the menu. The date you entered
is now saved.
 Press CANCE L on the display screen if you
do not wish to set the date.
 You now exit the menu. The date you entered
will not be saved.
MY24K12 - 13_1.0_01.02.2024
<Charge to Storage>
<LONG-LIFE mode>
Adjusting units
The displayed units can be shown using the metric
or imperial system. The unit can be selected from
the following variables:
Variable Metric
Distance km
Speed km/h
Energy Wh/km
consumption
Temperature °C
Altitude above sea m.a.s.l.
level
Table 43: Units
1 Open the S E TT INGS ME NU.
2 Open <Localization><Units>.
3 Follow the instructions on the display.
All values are displayed in the selected unit.
6.4.18.8 Adjusting the time format
The clock can be displayed in 12-hour or 24-hour
format.
1 Open the S E TT INGS ME NU.
2 Open <Localization>< Time Format>.
3 Follow the instructions on the display.
 The clock is displayed in the selected time
format.
Operation
Imperial
Mi
mph
Wh/Mi
°F
ASL
140