Commissioning; Checking The Battery - Kettler KN170 PD Series Translation Of Original Operating Instructions

5.3

Commissioning

Only trained specialist staff may perform initial
commissioning since initial commissioning of the
pedelec requires special tools and specialist
knowledge.
Experience has shown that a pedelec which has
not yet been sold is automatically handed to
customers as soon as it appears ready to ride.
It makes sense to prepare each pedelec so that it
is fully ready for use immediately after being
assembled.
 Complete an assembly report to document
quality assurance (see Section 11.1).
 Carry out all possible assembly work specified
on the assembly report.
 Record all actions completed on the assembly
report.
5.3.1

Checking the battery

The battery must be checked before it is charged
for the first time.
 Press the On-Off button (battery).
 If none of the LEDs on the battery level
indicator light up, the battery may be
damaged.
 The battery may be fully charged if at least one,
but not all, of the LEDs on the battery level
indicator lights up.
MY24K12 - 13_1.0_01.02.2024
Assembly
86