Panniers And Cargo Boxes; Mobile Holder - Kettler KN170 PD Series Translation Of Original Operating Instructions

Pedelecs pinion motor, fit remote basic and fit display
Table of Contents

Advertisement

6.5.5

Panniers and cargo boxes

Panniers and cargo boxes are permitted if they
§
are approved for use on e-bikes.
6.5.5.1 Bags
The following panniers and cargo boxes are
recommended:
Article number
08987-743
08987-744
Table 44: Recommended panniers and cargo boxes
More information at:
https://www.kettler-alu-rad.de/gb-en/accessories
6.5.5.2 Quadriga Front & Rear Basket
The Quadriga Front & Rear Basket is a front and
rear pannier rack basket made of aluminium with
an inlay. The baskets can be permanently fitted on
all Quadriga, Escaro and Comfort models.
Figure 144: Quadriga Front & Rear Basket
Article number
86990016
86990017
More information at:
https://www.kettler-alu-rad.de/gb-en/accessories
MY24K12 - 13_1.0_01.02.2024
Description
Lady Bag set
Business bag
Description
Front basket
Rear basket
6.5.6

Mobile holder

This phone case, used as the base for the SP
Connect system, is mounted on the stem.
Depending on the holder model, a mobile can
either be fitted directly on the handlebars or on the
handlebar stem. In the case of the first version,
the holder can be repositioned any time. When
mounted on the stem, the phone is fitted in a fixed
position. This allows it to be attached lower on the
pedelec.
Observe the operating instructions for the mobile
and the SP Connect mobile case.
Use on tarmacked roads only.
Protect mobile from theft.
6.5.6.1 Fastening the mobile
1 To attach, place the mobile which is in an SP
Connect mobile case onto the phone case.
 The fastener latches into position.
2 Turn the mobile 90° to the right.
3 The fastener is locked.
Figure 145: Locking the mobile to the right
Operation
149

Advertisement

Table of Contents
loading

Table of Contents