Kettler KN170 PD Series Translation Of Original Operating Instructions page 139

6.4.18.4 Operating the display
The display is operated using six buttons on the
control panel.
1
2
3
Figure 135: Position of navigation rocker switch (1),
plus (2) and minus (3) buttons
The rider can press the navigation rocker
switch (1)
• to the left or right to access the different main
screens and
• press to view the sub-screens.
The rider can use the plus button (2) and minus
button (3)
• to access the sub-levels and
• scroll up and down a list.
6.4.18.5 Opening the Drive main menu
The DRI V E MA I N M ENU screen will appear as
soon as the display is switched on.
Figure 136: Screenshot of FIT Comfort DRIVE MAIN MENU
MY24K12 - 13_1.0_01.02.2024
6.4.18.6 Opening other menus
 Press the navigations button to the left or
right.
 A new menu is displayed.
6.4.18.7 Changing the settings
The pedelec is stationary. You cannot open and

adjust the SE T TINGS M ENU while riding.
The display is inserted and shows the DRIVE

MAIN MENU.
 Press the navigation rocker switch until the
last page of the S E TT I NGS ME NU is
displayed.
All system and service-relevant values can be
read and changed in the settings. The settings
menu structure is customised and may change
when components or services are added.
Menu Submenu
Reset values
→
→
Default settings
→
→
→
→
→
Connectivity
→
→
My Bike
→
→
→
→
→
Charging
→
→
Table 42: Basic structure of FIT menu and sub-menu
Operation
<Trip Reset>
<Factory Reset>
<Language>
<Time>
<Date>
<Units>
<Time Format>
<Connect Komoot>
<Connect Heart Rate Sensor>
<Assistance>
<Calibration Altitude>
<Auto Backlight>
<Auto Power Off>
<Vibration Feedback>
<Normal Charge>
<Fast Charge>
139