Table of Contents
Advertisement
6.5.6.2 Releasing the mobile
1 Turn the mobile 90° to the left
The fastener is released.
2 Remove mobile
6.5.7
Suspension fork coil spring
If the desired suspension fork sag cannot be
achieved after adjustment, the coil spring
assembly must be replaced with a softer or harder
spring.
Fit a softer coil spring assembly group to
increase the sag.
Fit a harder coil spring assembly group to
decrease the sag.
6.5.8
Bar ends
Handlebar ends are permissible provided they
§
are professionally fitted to face the front at a
specialist shop and only if they are approved for
use on e-bikes. They must not seriously alter
load distribution.
6.5.9
Fixed weather protection systems
Fixed weather protection systems are only
§
permitted with the vehicle manufacturer's
approval.
6.5.10 Additional battery headlight
Fitting additional battery headlights is permitted
§
provided they comply with the laws of the country
where the pedelec will be ridden and if they are
approved for use on e-bikes.
MY24K12 - 13_1.0_01.02.2024
6.5.11 Kickstand
Kickstands are permitted if they are able to bear
§
the weight of the pedelec.
We recommend a parking stand into which either
the front wheel or rear wheel can be inserted
securely for pedelecs which do not have a
kickstand.
Description
Parking stand
universal stand
TWO-LEG STAND ADAPTER
FOR QUADRIGA 750 SERIES
Table 45: Accessories
Operation
Article number
XX-TWO14B
08959-510
150
Advertisement
Table of Contents
