Stellar S-1200 Snow Machine
Emptying the Tank after Operation
To empty the tank, follow the steps below:
Do not disconnect the safety cable.
Unscrew the lid on the fluid tank, as shown in Fig. 14.
Take out the fluid tank, as shown in Fig. 15.
Place the fluid tank on a flat service near the device, as shown in Fig. 16.
Use a funnel to pour the snow fluid from the tank into original snow fluid jerry can, as shown in Fig. 17.
Fill the jerry can with the exact snow fluid. Do not mix different types of snow fluid. Make sure that you
do not overfill.
Product code: 61115
Fig. 14
Fig. 16
23
Fig. 15
Fig. 17