StageBeam 300/500W Fresnel Warning Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling.
Page 4
● If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
StageBeam 300/500W Fresnel Operating Determinations ● This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects. ● The minimum distance between light output and the illuminated surface must be bigger than 1 meter.
Page 6
StageBeam 300/500W Fresnel The StageBeam can be mounted to any kind of truss with a clamp. Improper installation can cause serious injuries and/or damage of property! Connection with the mains Connect the device to the mains with the power-plug. Always check if the right color cable is connected to the right place. International EU Cable UK Cable...
StageBeam 300/500W Fresnel Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.com and request an RMA prior to shipping the...
StageBeam 300/500W Fresnel Description of the device Features The StageBeam 300/500W Fresnel is a theatre spot with high output. It is equipped with a GY9.5 ceramic lamp socket, suitable for 300/500W lamps. ● Light source: 300/500W lamp ● Lamp socket: GY9.5 ●...
Connect the device to the main power supply. Installing the lamp The Showtec StageBeam Fresnel 300/500W uses the GY9.5 Osram lamp, 300W (ordercode: 80703O) and the GY9.5 Osram lamp, 500W (ordercode: 80704O). Use only the appropriate lamp for your unit. Note that product versions, that use other lamps, may be offered in the future.
StageBeam 300/500W Fresnel Adjusting the beam angle 01) Turn the beam angle adjustment screw to the left or right to increase/decrease the beam angle. Fig. 03 Filter frame retaining clip and locking screw 01) Push the retaining clip sideways to open. 02) Loosen the locking screw at the top view of the fixture and move the metal locking plate to the back.
StageBeam 300/500W Fresnel Maintenance The operator has to make sure that safety-related and machine-technical installations are to be inspected by an expert after every year in the course of an acceptance test. The operator has to make sure that safety-related and machine-technical installations are to be inspected by a skilled person once a year.
01) Power supply. Check that the unit is plugged into an appropriate power supply. 02) The lamp. Replace the lamp. See page 8 for installing the lamp. 03) The internal fuse. Return the device to your Showtec dealer. 04) If all of the above appears to be O.K., plug the unit in again.