Table of Contents
Advertisement
Stellar S-1200 Snow Machine
8.
Maintenance
Safety Instructions for Maintenance
DANGER
Electric shock caused by dangerous voltage inside
Disconnect power supply before servicing or cleaning.
WARNING
Risk of burns due to hot surface
Allow the device to cool down for at least 15 minutes before servicing or cleaning.
Preventive Maintenance
Attention
Before each use, examine the device visually for any defects.
Make sure that:
●
All screws used for installing the device or parts of the device are tightly fastened and are not
corroded.
●
The safety devices are not damaged.
●
There are no deformations on housings, fixations and installation points.
●
The power cables are not damaged and do not show any material fatigue.
Basic Cleaning Instructions
The device must be cleaned periodically from the built-up dust and snow fluid residues.
To clean the device, follow the steps below:
Disconnect the device from the electrical power supply.
Allow the device to cool down for at least 1 hour.
Remove the dust collected on the external surface with dry compressed air and a soft brush.
Clean the snow fluid residues from the snow output nozzle (03) with a damp cloth. Use only a clean,
lint-free soft cloth.
Clean the DMX and other connections with a damp cloth.
Attention
●
Do not immerse the device in liquid.
●
Do not use alcohol or solvents.
●
Make sure that the connections are fully dry before connecting the device to the power supply and
to other devices.
Product code: 61115
33
Advertisement
Table of Contents
