Table of Contents
Advertisement
Stellar S-1200 Snow Machine
Manual Operation
To set up the device, follow the steps below:
Fill the tank (Fluid Tank Capacity 5 L). See 6.3. Filling the Tank on page 22 for more information.
Connect the power cable before supplying power to the device. See 4.5. Connecting to Power
Supply on page 17 for more information.
Set the ON/OFF switch (09) to ON.
To operate the device manually as a stand-alone device:
●
Adjust the output volume in Snow menu. See 6.7.4.2. Snow Volume on page 27 for more information.
●
Adjust the wind speed in Wind menu. See 6.7.4.3. Wind Speed on page 27 for more information.
●
Adjust the Interval volume in Interval menu. See 6.7.4.3. Interval on page 28 for more information.
●
Adjust the Duration volume in Duration menu. See 6.7.4.4. Duration on page 28 for more information.
Notes:
●
Manual operation with the control panel on the device always has priority over the remote control.
Control Panel (Device)
●
Use the START / PAUSE button to start/pause your snow operation.
●
Use the UP and DOWN buttons to increase/decrease numeric values.
●
Use the MENU button to navigate through the menus.
Product code: 61115
A) LCD display
B)
Start / Pause button
C) Down button
D) Up button
E)
Menu button
Fig. 20
25
Advertisement
Table of Contents
