Table of Contents
Advertisement
Stellar S-1200 Snow Machine
4.
Installation and Setup
Safety Instructions for Installation
WARNING
Incorrect installation can cause serious injuries and damage of property.
If trussing systems are used, installation must be carried out only by instructed or skilled persons.
Follow all applicable European, national and local safety regulations concerning rigging and trussing.
Personal Protective Equipment
During installation and rigging wear personal protective equipment in compliance with the national and
site-specific regulations.
Installation Site Requirements
●
The device can be used only indoors.
●
The device can be mounted to a truss or other rigging structure in any orientation.
●
The minimum distance to other objects must be bigger than 0,8 m.
●
The minimum distance between the snow output nozzle (03) and the flammable surface must be
bigger than 0,8 m.
●
The maximum ambient temperature ta = 40 °C must never be exceeded.
●
The relative humidity must not exceed 50 % with an ambient temperature of 40 °C.
Rigging
The device can be positioned on a flat surface or mounted to a truss or other rigging structure in a
horizontal orientation. The maximum inclination angle of the device should not exceed 15º. Make sure
that all loads are within the pre-determined limits of the supporting structure.
CAUTION
Restrict the access under the work area during rigging and/or derigging.
Product code: 61115
14
Advertisement
Table of Contents
