Page 2
New products are being launched regularly. We work hard to keep you, our customer, satisfied. You can get some of the best quality, best priced products on the market from Showtec. So next time, turn to Showtec for more great equipment.
Only use device indoor, avoid contact with water or other liquids. Only use snow in well-ventilated rooms. Only use the high-quality, snow liquid, that your Showtec dealer recommends.(5L snow fluid ordercode 80359) Other snow liquids may cause poor effect snow.
The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature. If your Showtec SnowStorm fails to work properly, discontinue use immediately. Drain all snow liquid from the tank, pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
Rigging Please follow the European and national guidelines concerning rigging, trussing and all other safety issues. Do not attempt the installation yourself ! Always let the installation be carried out by an authorized dealer ! Procedure: If the snow machine is lowered from the ceiling or high joints, professional trussing systems have to be used.
Description of the device Features The Snowstorm is a versatile and powerful snow machine from Showtec. • 1000 W Heater • Snow output min. 1000 mm /min. • Fuse 6,3A / 250V • Tank capacity 5 L Overview Fig. 1...
Backside Fig. 2 5) Snow output 600W Min. / 1000W Max. 6) ON / OFF 7) DMX input 8) DMX output 9) IEC Power connector + Fuse 6,3A / 250V Installation Installing the Snow machine Remove all packing materials from the snow machine. Check that all foam and plastic padding is removed, especially in the nozzle area.
DMX-input (7). When the power switch (6) is set to on, the red LED (4) will turn on. The DMX connector (8) can be used to connect a connector Snowstorm. You can now control several machines with one remote.
Maintenance The Snowstorm requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents. Keep connections clean. Disconnect electric power, and then wipe the connections with a damp cloth.
Product Specification Model: Showtec Snowstorm Voltage: 230V-50Hz (CE) Power consumption: 1000W(230V) Fuse: 250V/6,3A Output: 1000mm /min. Tank capacity : 5 L Dimensions 540 x 320 x 230 mm (LxWxH) (H=440 incl. bracket) Weight: 10,5 kg Design and product specifications are subject to change without prior notice.