Emptying The Tank After Operation - SHOWTEC Stellar FZ-1000 Fazer User Manual

Stellar FZ-1000 Fazer

Emptying the Tank after Operation

To empty the tank, follow the steps below:
Do not disconnect the safety cable.
Unscrew the lid on the fluid tank, as shown in Fig. 14.
Take out the fluid tank, as shown in Fig. 15.
Place the fluid tank on a flat service near the device, as shown in Fig. 16.
Use a funnel to pour the fog fluid from the tank into original fog fluid jerry can, as shown in Fig. 17.
Fill the jerry can with the exact fog fluid. Do not mix different types of fog fluid. Make sure that you do
not overfill.
Product code: 61114
Fig. 14
Fig. 16
23
Fig. 15
Fig. 17