Ibm Token-Ring Network Pc Adapter - IBM Token-Ring Network PC Adapter Hardware Maintenance And Service

IBM Token-Ring Network PC
Adapter
If you have an IBM Personal Computer, you should install
the IBM Token-Ring Network PC Adapter in expansion
slot 4. This position ensures that the adapter will get
sufficient ventilation. If an adapter already occupies slot
4, check the documentation for that adapter to determine
if the adapter requires slot 4. If it does not require slot 4,
move the adapter to another slot. If the adapter does
require slot 4, install the IBM Token-Ring Network PC
Adapter in the nearest available slot.
In the IBM Portable Personal Computer, the IBM
Token-Ring Network Adapter will fit only in the long slot
closest to the monitor. See the "Options Installation"
section of your IBM Portable PC Guide to Operations for
specific installation instructions.
If you have a IBM Personal Computer XT or AT, you can
install the adapter in any of the slots.
The IBM Token-Ring Network PC Adapter should not be
installed in an IBM Personal Computer Expansion Unit.
4-2