Table of Contents
Advertisement
After an error message appears on the screen, the
following line is displayed:
ERROR (Resume
=
"Fl" Key)
Press the
Fl
key to cause the system unit to attempt to
bypass the error and complete POST. Depending on
the error, POST may not be completed.
If POST is completed even though there were errors,
write down the error messages, and load the Advanced
Diagnostics. See "Loading the Advanced Diagnostics"
on page 3-2.
If POST is not completed, see your IBM Personal
Computer's Guide to Operations or Hardware
Maintenance and Service manual.
2-7
Advertisement
Table of Contents
