4
SELECT THE ADAPTER(S) THAT YOU WISH
TO TEST.
SELECT ONE OF THE FOLLOWING:
o --
Primary IBM Token-Ring Network PC Adapter
1 -- Alternate IBM Token-Ring Network PC Adapter
ENTER THE NUMBER OF YOUR SELECTION OR
PRESS ENTER TO TEST BOTH ADAPTERS?
If you want to test the primary adapter, type 0, then
press Enter and go to step 5.
If you want to test the alternate adapter, type 1, then
press Enter and go to step 5.
If you want to test both adapters, just press Enter and
go to step 5.
3-10
Need help?
Do you have a question about the Token-Ring Network PC Adapter and is the answer not in the manual?