Table of Contents
Advertisement
Example: The Test Detected an Error
This example shows that an error was detected while the
Adapter Card Tests were running on the primary adapter.
TESTING
Primary IBM Token-Ring Network PC Adapter
ADAPTER ADDRESS: 10005A000188
CODE LEVEL: FO FOFO A338028
INTERRUPT LEVEL: 2
ROM ADDRESS:
CCOOO
E007 - Adapter Cord lests
0020 - Extended Error Code
0: 13: 21
ERROR --
Primary IBM Token-Ring Network PC Adapter
166EO S
The first line on the example screen indicates that the
primary adapter was being tested.
The next two lines (the adapter card status) show the
adapter address, the adapter microcode level, the interrupt
level, and the ROM address:
The fourth and fifth lines are the testing status and error
codes, indicating that the Adapter Card Tests failed:
•
E007 - The Adapter Card Tests
(EO)
failed with error
code 07 (Command Canceled, Severe Failure)
•
FAILED - 5 - The Adapter Card Tests did not run
successfully; the tests should run four more times to
complete the request.
•
0020 - The extended error code for error code 07 is
0020 (the card diagnostics could not execute).
3-38
Advertisement
Table of Contents
