IBM Token-Ring Network PC Adapter Hardware Maintenance And Service page 67

15
IS THERE CONTINUITY?
YES
Go to step 16, to check the cable for short
circuits.
NO
Replace the adapter cable with a new one, and
rerun the Advanced Diagnostics.
Stop here.
16
CHECK CABLE FOR SHORT CIRCUITS
Insert an assembled IBM Cabling System Data Connector
that has no cable attached to it, into the data connector
on the adapter cable being tested. This will open the
shorting bars on the adapter cable being tested.
U sing your testing device, check the adapter cable to see
that there are no short circuits between any two pins of
the D-connector or between the shield and any pin.
Go to step 17.
3-30