Table of Contents
Advertisement
Type the number of your selection, then press Enter.
1 - To run the tests with the adapter cable
connected to the network.
2 - To run the tests with the adapter cable
disconnected from the network.
3 - To run the tests with the adapter cable
disconnected from the adapter, and the wrap plug
installed in its place. See Appendix A for
instructions on installing the wrap plug. The tests
will tell you on the screen when to use the wrap
plug.
If you selected the Open Phase Tests, go to step 11.
If you selected the Transmit/Receive Tests or all of the
tests, go to step 12.
3-21
Advertisement
Table of Contents
