IBM Token-Ring Network PC Adapter Hardware Maintenance And Service page 123

29
The IBM Token-Ring Network PC Adapter and
Adapter Cable are now installed. You may want to
use the Advanced Diagnostics to check the installed
adapter and cable before you reconnect the other
cables to your computer and connect the adapter to
the network (see steps 30 and 31 of this procedure).
30
Reconnect all cables to the computer for attached
devices. Use your computer's
Guide to Operations
to
recable the computer, if you do not remember how
the cables were attached.
31
Before connecting the other end of your adapter
cable to the network, see the
IBM Token-Ring
Network Installation Guide
for information on
connecting to the network.
5-20