Table of Contents
Advertisement
18
If you were running the diagnostics to check your
adapter after installing it, the tests are complete and
your adapter appears to be operating correctly.
If you were running the diagnostics to isolate a
suspected problem with your adapter, the tests have
been completed without finding your problem. The
following steps should help you to identify
additional symptoms:
a. Check the adapter cable to see that it is firmly
attached.
b. Make sure that the adapter switches are properly
set and that the card is firmly seated in the I/O
slot of your system unit.
c. Select LOG UTILITIES to record any errors that
occur during testing.
d. Run the Advanced Diagnostics, making the
following menu selections:
•
On the System Checkout Menu (Menu 4),
select option 1 - RUN TESTS MULTIPLE
TIMES
•
On the Test Selection Menu (Menu 8) select
option' 10 - RUN ALL THE ABOVE TESTS.
e. When the tests have been completed, examine the
error log to determine any indications of a
problem. See "Advanced Diagnostics Messages
and Codes" on page 3-34 for additional
information about the error indications.
If the tests have indicated no errors, your adapter or
adapter cable (if tested for continuity and shorts) is
probably not the cause of your suspected problem.
Seek technical assistance.
3-33
Advertisement
Table of Contents
