IBM Token-Ring Network PC Adapter Hardware Maintenance And Service page 13

1-2
Complete information about the Adapter Kit is
found in the IBM Token-Ring Network PC
Adapter Guide to Operations, available with each
kit.
See your place of purchase to obtain the adapter
cable (PIN 6339098) and the kit. The wrap plug
(PIN 6165899) and The IBM Token-Ring Network
PC Adapter Card (PIN 61X3931) are also
available separately.
The IBM Token-Ring Network PC Adapter can
be installed in an IBM Personal Computer, IBM
Personal Computer XT, IBM Personal Computer
AT, or IBM Portable Personal Computer.
Note: Two IBM Token-Ring Network PC
Adapters can be installed in an IBM PC XT or
IBM Personal Computer AT. Only one adapter
can be installed in the IBM Personal Computer
or the IBM Portable PC. The adapter cannot be
installed in an IBM Personal Computer
Expansion Unit.
A typical IBM Personal Computer configuration
for the IBM Token-Ring Network is:
• A system board with 256K bytes of random
access memory
• An attached keyboard
• A diskette drive
• A Token-Ring Network PC Adapter
• A printer (optional)
•
An IBM monochrome display.