IBM Token-Ring Network PC Adapter Hardware Maintenance And Service page 32

To use this screen:
1. Enter the number of times you want to run the
diagnostic tests. Valid numbers are 1 to 65,534.
Leave the number blank if you want the tests to
run continuously.
2. Press Enter.
Note: Press CTRL and C together whenever you
want to stop the tests and return to Menu 2.
3. If you want the tests to stop after the first error
message is displayed, type Y for Yes and press
Enter. To resume testing after an error message is
displayed, press Enter.
If you do not want the tests to stop after the first
error message is displayed, type N for No and press
Enter.
The diagnostics move to Menu 6 if this is the first time
the tests are run after the diagnostics are loaded;
otherwise, they move to Menu 8.
2-19