IBM Token-Ring Network PC Adapter Hardware Maintenance And Service page 81

BAD CABLE: Replace Your Adapter Cable
Meaning:
Action:
The Advanced Diagnostics have detected a
problem in the adapter cable.
If your adapter cable has a modular
telephone plug at one end, ignore this
message. Refer to the IBM Token-Ring
Network Telephone Twisted-Pair Media
Guide for problem isolation procedures.
If your adapter cable has an IBM Cabling
System Data Connector at one end, rerun
the test you had selected. If the problem
continues, replace the cable.
BAD ADAPTER: Replace the Token-Ring Adapter
Meaning:
Action:
The Advanced Diagnostics have detected a
problem in the adapter.
Rerun the test you had selected. If the
problem continues, replace the adapter. See
Chapter 5.
BAD LOBE: faulty Lobe Operation-See Your Network Manager
Meaning:
Action:
3-44
The Advanced Diagnostics have detected a
problem between the adapter cable that
connects your adapter to the network and
the nearest upstream access unit.
Rerun the test. If the problem continues,
report test results to your network manager
or administrator.