Table of Contents
Advertisement
During all work (mounting, commissioning, servicing, operation, repair and demounting), the
instructions contained in this manual must be observed.
1.7
Disposal of devices
For disposal, the applicable directives and laws must be observed.
• WEEE: Directive 2012/19/EU
• RoHS Directive 2011/65/EU
• REACH: Regulation (EC) No. 1907/2006
1.8
Legal notice
1.8.1
Instructions for correct measurement in accordance with the CSA-type
examination certificate
Obligations for operators of the charging equipment, which they have to meet as a
precondition for operation of the charging equipment as intended.
The operator of the charging device is the user of the measuring instrument for the purposes of section 31 of
the German Measurement and Calibration Act (MessEG).
1.
Use of the charging device shall only be deemed compliant and in accordance with the calibration
regulations if the meters installed in it are not exposed to ambient conditions other than those for which
their type examination certificate was issued.
2.
Use of the charging device shall only be deemed compliant and in accordance with the calibration
regulations when the authentication methods listed under Section 1.3.2.3.2 of the currently valid TEC of
these 6.8 devices are used.
3.
When signing on the charging points with the German Federal Network Agency, the user of this product
must also sign on the public key indicated for these charging points on the charging station! Without
this sign-on procedure, operation of the station in compliance with the applicable calibration regulations
is not possible. Weblink: https://www.bundesnetzagentur.de/DE/Sachgebiete/ElektrizitaetundGas/
Unternehmen_Institutionen/E-Mobilitaet/start.html
4.
The user of this product must ensure that the calibration validity periods for the components in the
charging device and for the charging device itself are not exceeded.
5.
The user of this product must ensure that charging devices are taken out of operation promptly if
operation in compliance with the applicable calibration regulations is no longer possible due to error or
fault messages on the display of the human-machine interface relevant under calibration law. The list of
fault and error messages in these operating instructions must be taken into account.
6.
The user must save the signed data packets that are read out from the charging device permanently and
without gaps in accordance with the pagination and make them available to authorised third parties
(obligation to maintain memory). The data packets must be saved (also) on hardware that is dedicated for
this purpose and in the user's possession or on the basis of corresponding agreements at the E-Mobility
service provider or in the backend system ("dedicated memory"). Permanently means that the data must
be saved not only until the business transaction is completed, but at least until the expiry of any possible
iONiX 25_DC-Wallbox_D00461_01_M_XXEN/01.2024
iONiX Light 25 Wallbox
iONiX Medium 25 Wallbox
iONiX Supreme 25 Wallbox
7
Advertisement
Table of Contents
Need help?
Do you have a question about the iONiX Light 25 Wallbox and is the answer not in the manual?