Transport And Storage - Bender iONiX Light 25 Wallbox Manual

Scope of delivery
The DC Wallbox is delivered as a complete device, upright, in a package on a pallet. Included in the scope of
delivery:
• 1x DC Wallbox including cable cover
• 1x mounting rail
• 5x screws (8 x 60) according to DIN 571 (type 107 with associated plugs for mounting on a concrete wall)
• 1x key set with 3x keys
• 1x key tag
• 1x screw for the cable cover
• 1x TPE Uni insert (seal for power supply)
• 1x washer
• 1x nut
• 1x drilling template
• 1x Installation quick-start guide
1.4

Transport and storage

Please note:
After you receive the delivery, check the shipping and device packaging for transport damage. After you open
the packaging, check the contents for damage and whether the scope of delivery is complete. In the event of a
complaint, immediately notify the distributor named on the name plate.
Open the device packaging carefully, do not use sharp objects.
CAUTION
Exercise caution to prevent damage!
The DC Wallbox and additional material must be handled with extreme care and must not be thrown
or dropped. When manoeuvring the DC Wallbox, take care not to bump or scratch corners and
other objects. To prevent moisture from entering the DC Wallbox, do not open the outer and inner
enclosure outdoors in precipitation or heavy fog.
CAUTION
Caution against damage during storage!
Ensure that no moisture can enter the interior. Do not store the device in a humid environment or
outdoors.
WARNING
Do not transport or store the DC Wallbox when it is connected to the power supply.
iONiX 25_DC-Wallbox_D00461_01_M_XXEN/01.2024
iONiX Light 25 Wallbox
iONiX Medium 25 Wallbox
iONiX Supreme 25 Wallbox
5