Warranty And Liability; Responsibilities Of The Operator Or The Owner - Bender iONiX Light 25 Wallbox Manual

General information
Carrying and lifting
Surface
Surfaces that may be touched
Surfaces that may not be touched
1.5

Warranty and liability

The manufacturer guarantees the function described in the operating instructions.
Should mechanical or electrical changes be made to the DC Wallbox, its declaration of conformity becomes
invalid. Further operation of the DC Wallbox is then no longer permitted.
Warranty and liability claims in the event of injury to persons or damage to property are excluded in case of:
• Improper use of the DC Wallbox
• Incorrect mounting, commissioning, operation and servicing of the DC Wallbox
• Failure to observe the instructions in this operating manual regarding transport, storage, commissioning,
operation and servicing of the device
• Unauthorised changes to the DC Wallbox made by parties other than the manufacturer
• Non-observance of technical data
• Repairs carried out incorrectly
• The use of accessories and spare parts that are not approved by the manufacturer
• Catastrophes caused by external influences and force majeure
1.6

Responsibilities of the operator or the owner

All the work on the DC Wallbox, such as mounting, installation, servicing and demounting are
to be carried out only by an electrically skilled person as per DIN VDE 1000-10 who is certified
for working on the DC Wallbox.
Any type of operation that impairs the safety of the DC Wallbox must be refrained from.
6 iONiX 25_DC-Wallbox_D00461_01_M_XXEN/01.2024
Colour
Green
White
Enclosure element
Top and bottom
Door (glass)
Side parts (plastic in some cases)
Status and ambient lighting
Status and lighting mast