4.3
Removal
Procedure for removal
• De-energise the DC Wallbox and secure it against reconnection of the power supply. The five safety rules as
per DIN EN 50110-1 shall be observed!
• Before opening the DC Wallbox, wait until the minimum discharging time has passed and after opening,
verify that the AC and the DC circuits are de-energised
• Loosen fastenings (bottom attachment points)
• Use a lifting table to lift the DC Wallbox and unhook it from the mounting rail, then remove it from the wall
towards the front
• If necessary, pull the power-supply cable out of the opening
The DC Wallbox can be given or sent to the distributor for disposal (for the address refer to the name plate).
iONiX 25_DC-Wallbox_D00461_01_M_XXEN/01.2024
iONiX Light 25 Wallbox
iONiX Medium 25 Wallbox
iONiX Supreme 25 Wallbox
25
Need help?
Do you have a question about the iONiX Light 25 Wallbox and is the answer not in the manual?