List Of Abbreviations - Bender iONiX Light 25 Wallbox Manual

2

List of abbreviations

Abbreviation
ALM
TEC
BNetzA
CAN
CCS2
CPO
DCC
DC Wallbox
DLM
DMC
EMSP
EVSE
HMI
NFC
PK
PU
RCD
RFID
SLS
SU
USB
UID
In the following the abbreviations are mostly used in this manual.
Ambient Light Module (ALM113): Printed circuit board at the upper end of the status
and lighting mast
Type examination certificate
German Federal Network Agency
Controller Area Network
Combined Charging System 2
Charge point operator
DC charge controller (DCC613)
iONiX (Light, Medium, Surpreme) 25 Wallbox
Dynamic load management
Data matrix code
E-mobility service provider
Electric Vehicle Supply Equipment
Human Machine Interface (HMI180): Communication module: printed circuit board for
controlling the display, lighting and antennas
Near-field communication
Public key: The public key is a technical identifier which has been allocated directly
to the DC Wallbox during production. It is sent to the German Federal Network
Agency (BNetzA) during registration and is used for traffic routing, cross-network
data communication for addressing purposes and for the invoicing of interconnection
services.
Power Unit: AC/DC converter in the DC Wallbox
Residual current device: Residual current circuit breaker
Radio-frequency identification
Selective circuit breaker
Safety unit (SU621)
Universal Serial Bus
Unique identifier
iONiX 25_DC-Wallbox_D00461_01_M_XXEN/01.2024
iONiX Medium 25 Wallbox
iONiX Supreme 25 Wallbox
Description
iONiX Light 25 Wallbox
11