Camera Settings (Rls-2020V Only); Image Adjustment - Optex REDSCAN mini-Pro Series Settings Manual

RLS-2020V 1.x.x (xxxx/xx/xx)
Apply settings
Detection range

Image adjustment

Detection profile 1
Detection profile 2
Image
Input
Brightness
Event code
Laser settings
Contrast
Camera settings *
Sharpness
Image adjustment
Saturation
Privacy mask
Day/Night
Miscellaneous
Wide dynamic range
ONVIF media profile
View
Event log
Flicker correction
Date and Time
Power line frequency
Network
Security
Maintenance
Information
(Bold letters = advanced settings)
*
= RLS-2020V only
Revert
128
128
Use wide dynamic range
50 Hz
?
5-4. Camera settings
5-4-1.Image adjustment
Image
Brightness
Contrast
50
Sharpness
Saturation
64
Wide dynamic range
Dynamic range is the difference in brightness between
the darkest and brightest parts of an image.
When it is turned on, it is corrected so that the
difference in brightness is reduced, and overexposure
and underexposure are less likely to occur.
It is recommended to turn it on under conditions where
there is a large difference in brightness.
Flicker correction
It should be same as the power frequency.
42
5. Advanced Settings
(RLS-2020V only)
[ 0 to 100 ]
[ 0 to 255 ]
[ 0 to 255 ]
[ 0 to 255 ]
[ 50 Hz, 60 Hz ]