Tesla CYBERTRUCK Owner's Manual page 120

Autopilot Features
• You do not respond to repeated reminders to keep
your hands on the wheel and subsequent messages
on the touchscreen (see
120).
When Autosteer cancels, a chime sounds and the
Autosteer icon either turns gray to indicate that
Autosteer is no longer active, or disappears to indicate
that it is not currently available.
When Traffic-Aware Cruise Control or Autosteer cancels,
Cybertruck does not coast. Instead, regenerative braking
slows down Cybertruck in the same way as when you
move your foot off the accelerator when driving without
Traffic-Aware Cruise Control (see
on page ).
While Using Autopilot
When Traffic-Aware Cruise Control is active and
Autopilot is maintaining a set speed, the speed is
highlighted with blue text on the touchscreen.
When Autosteer is active, the steering wheel icon is blue
and the lane markings are highlighted in blue on the
visualization.
If unable to detect lane markings, Autosteer may
determine the driving lane based on a vehicle you are
following. In most cases, Autosteer attempts to center
Cybertruck in the driving lane. However, there may be
situations in which Autosteer follows a driving path that
is offset from the center of the lane (for example, if
guard rails are detected).
Maintaining the Set Speed
When Autopilot is active, Cybertruck maintains your set
cruising speed whenever a vehicle is not detected in
front of it. When cruising behind a vehicle, Cybertruck
accelerates and decelerates as needed to maintain a
chosen following distance (see
Distance on page 118), up to the set speed.
You can manually accelerate at any time by pressing the
accelerator pedal, but when you release the pedal
Cybertruck resumes cruising at the set speed.
Cybertruck also adjusts the cruising speed when
entering and exiting curves.
When Cybertruck is actively slowing down to maintain
the selected distance from the vehicle ahead, brake
lights turn on. You may notice slight movement of the
brake pedal. However, when Cybertruck is accelerating,
the accelerator pedal does not move.
Changing the Set Speed
Roll the right scroll wheel up to increase, or down to
decrease, the set speed.
118
Driver Attentiveness on page
Regenerative Braking
Adjusting the Following
It may take a few seconds for Cybertruck to reach the
new cruising speed.
Adjusting the Following Distance
To adjust the following distance you want to maintain
between Cybertruck and a vehicle traveling ahead of
you, touch Controls > Autopilot > Cruise Follow
Distance or press the right scroll button on the steering
wheel to the left or right.
Owner's Manual