Parts And Accessories - Tesla CYBERTRUCK Owner's Manual

Parts, Accessories, and
Modifications
Use only genuine Tesla parts and accessories. Tesla
performs rigorous testing on parts to ensure their
suitability, safety, and reliability. Purchase these parts
from Tesla, where they can be professionally installed
and you can receive expert advice about modifications
to Cybertruck. Accessories are available for purchase
online at the Tesla Shop. Some accessories may not be
available in your market region or compatible with your
exact vehicle.
Tesla is unable to assess parts manufactured by other
distributors and therefore accepts no responsibility if
you use non-Tesla parts on Cybertruck.
WARNING: Installing non-approved parts and
accessories, or performing non-approved
modifications, can affect the performance of
Cybertruck and the safety of its occupants. Any
damage caused by using or installing non-
approved parts, or by performing non-approved
modifications, is not covered by the warranty.
WARNING: Tesla does not accept liability for
death, personal injury or damage that occurs if you
use or install non-approved accessories or make
non-approved modifications.
Body Repairs
If your Cybertruck is in a collision, contact Tesla or a
Tesla-approved Body Shop to ensure that it is repaired
with genuine Tesla parts. Tesla has selected and
approved body shops that meet strict requirements for
training, equipment, quality, and customer satisfaction.
Some repair shops and insurance companies might
suggest using non-original equipment or salvaged parts
to save money. However, these parts may not meet
Tesla's high standards for quality, fit, and corrosion
resistance. In addition, non-original equipment and
salvaged parts (and any damage or failures they might
cause) are not covered by the warranty.
Connecting Accessories to the 48V
Power Feeds
Cybertruck is equipped with two power feeds. The
power feeds provide access to the 48V low voltage
system, which can be used to power accessories.
CAUTION: Do not connect a power source (such
as a solar panel or external battery) to a power
feed. Doing so may damage Cybertruck.
Maintenance

Parts and Accessories

WARNING: The two power feeds are the only
points at which you can connect accessories
directly to the low voltage system. Do not use any
other low voltage wiring in Cybertruck to power
accessories. Doing so can lead to unpredictable or
unexpected results (such as a total loss of power
steering) and can affect the performance of
Cybertruck and the safety of its occupants. Any
damage caused by using or installing non-
approved parts, or by performing non-approved
modifications, is not covered by the warranty.
Tapping into the power feeds should only be done
by knowledgeable and experienced individuals.
Tesla does not accept liability for death, personal
injury or damage that occurs if you install
accessories using non-approved methods or
circuits.
48V Power Feed Specifications
There are two power feeds:
• One power feed is located on the roof (400W
maximum draw).
• One power feed is located in the powered frunk
(400W maximum draw).
Each power feed operates in the following range:
• Minimum: 28V
• Nominal: 44–50V
• Maximum: 58V
Each power feed contains three wires:
Wire Color
Red with a blue stripe
Green
Roof power feed: Black
with a blue stripe
Powered frunk power
feed: Brown with a blue
stripe
NOTE: The power feeds are designed to stop providing
power when current that exceeds the listed
specifications is detected. If a power feed unexpectedly
stops providing power, reset them by touching Controls
> Outlets & Mods > Reset.
CAUTION: If the wires in the vehicle do not match
this information, use the mobile app to schedule a
service appointment.
Function
Positive (+) terminal:
Provides 48V power
Provides access to the
Local Interconnect
Network (LIN)
Negative (-) terminal:
Provides a grounding
point
201