Seat Belts - Tesla CYBERTRUCK Owner's Manual

Wearing Seat Belts
Using seat belts and child safety seats is the most
effective way to protect occupants if a collision occurs.
Therefore, wearing a seat belt is required by law in most
jurisdictions.
All seats are equipped with three-point inertia reel seat
belts. Inertia reel belts are automatically tensioned to
allow occupants to move comfortably during normal
driving conditions.
Seat Belt Reminders
The seat belt reminder on the touchscreen
alerts you if a seat belt for an occupied
driver or passenger seat is unbuckled. If all
occupants are buckled up and the
reminder stays on, re-buckle seat belts to
ensure they are correctly latched. Also
remove any heavy objects (such as a
briefcase) from an unoccupied seat. If the
reminder light continues to stay on,
schedule a service appointment.
You can temporarily disable a seat belt reminder
associated with a rear seating position. This is useful
when you are carrying an object in a rear seat that
triggers the seat belt reminder alert. To disable the
reminder, touch the associated seat on the seat belt
reminder popup message that displays on the
touchscreen when a seat belt reminder is active. When a
reminder is disabled, the seat belt reminder icon is
replaced by a seat icon, for the current drive only. Touch
the seat again to re-enable the reminder.
WARNING: Seat belts must be worn by passengers
in all seating positions. Do not disable a seat belt
reminder when the seating position is occupied by
a passenger.
To Fasten a Belt
1. Ensure correct positioning of the seat (see
Driving Position on page
2. Draw the belt out smoothly, ensuring the belt lays flat
across the pelvis, chest and mid-point of your collar
bone, between the neck and shoulder. Ensure the belt
is routed correctly and is not twisted. Never sit on the
seat belt or any seat belt component.
WARNING: A twisted or incorrectly routed seat
belt can cause damage and interfere with the
functionality of the seat belt system.
3. Insert the latch plate into the buckle and press
together until you hear a click indicating it is locked
in place.
Seating and Safety Restraints
Correct
36).
4. Pull the belt to check that it is securely fastened.
5. Pull the diagonal part of the belt toward the reel to
remove excess slack.
To Adjust the Shoulder Anchor
Height
Cybertruck is equipped with an adjustable shoulder
anchor for each front seat to ensure that the seat belt is
positioned correctly. The seat belt should lay flat across
the mid-point of your collar bone while in the correct
driving position (see Correct Driving Position on page
36). Adjust the height of the shoulder anchor if the seat
belt is not positioned correctly:
1. To raise the shoulder anchor, slide it upwards.
2. To lower the shoulder anchor, press and hold the
arrow above the shoulder anchor while sliding the
anchor downward. The arrow has a softer area
underneath that engages a release button, allowing
you to lower the anchor. Release the button when the
shoulder anchor is in the desired position.
3. Without pressing the button, pull firmly downward on
the seat belt to check that it is locked into position.

Seat Belts

39