NOTE: You must press the brake pedal to shift out of
Neutral if Cybertruck is moving slower than
approximately 5 mph (8 km/h).
Cybertruck automatically shifts into Park when you open
the driver's door to exit the vehicle unless the vehicle is
in certain modes such as Transport or Car Wash Mode
which allows the vehicle to stay in Neutral even when
you leave.
Keeping Your Vehicle in Neutral
(Transport Mode)
To keep Cybertruck in Neutral when you exit, allowing it
to roll freely (for example, pulling onto a flatbed truck),
you must activate Transport mode:
1. Shift into Park.
2. Press the brake pedal.
3. Touch Controls > Service > Towing. The touchscreen
displays a message reminding you how to properly
transport Cybertruck.
4. Press the Transport Mode. It turns blue to show that
Cybertruck is now in Transport Mode. Cybertruck is
now free-rolling and can slowly be rolled (no faster
than walking speed) for short distances or winched
(for example, onto a flatbed truck).
For more information on Transport Mode, see
Transport Mode on page
218.
NOTE: In Transport mode, Cybertruck does not shift into
a drive mode. You must first cancel Transport mode by
touching Transport Mode again. Transport mode also
cancels if you use the touchscreen or drive mode
selector on the overhead console to shift into Park or if
you manually apply the parking brake by touching
Controls > Safety > Parking Brake.
Driving
Activate
Shifting
77
Need help?
Do you have a question about the CYBERTRUCK and is the answer not in the manual?
Questions and answers