Tesla CYBERTRUCK Owner's Manual page 264

Troubleshooting Alerts
• Detects the wall outlet voltage is too high, or
• Detects an unexpected increase in supply voltage from the wall outlet.
What to do:
Try charging the vehicle with a different wall outlet. If the vehicle starts to charge, the issue was likely with the
original wall outlet. Contact an electrician to inspect the building wiring connection to that outlet.
If the vehicle still does not charge when you try a different wall outlet, try charging at a different location.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can
be located through the map on your vehicle's touchscreen display. See
details.
For more information on troubleshooting Mobile Connector status lights and charging issues, refer to the
owner's manual.
UMC_a005
Unable to charge with Mobile Connector
Voltage too low / Try a different wall outlet
What this alert means:
The vehicle cannot charge, or charging is interrupted, because either the Mobile Connector:
• Does not detect enough supply voltage from the wall outlet, or
• Detects an unexpected drop in supply voltage from the wall outlet.
What to do:
Try charging the vehicle with a different wall outlet. If the vehicle starts to charge, the issue was likely with the
original wall outlet. Contact an electrician to inspect the building wiring connection to that outlet.
If the vehicle still does not charge when you try a different wall outlet, try charging at a different location.
This alert is usually specific to external charging equipment and power sources and does not typically indicate an
issue with your vehicle that can be resolved by scheduling service.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can
be located through the map on your vehicle's touchscreen display. See
details.
For more information on troubleshooting Mobile Connector status lights and charging issues, refer to the
owner's manual.
UMC_a007
Mobile Connector control box temperature high
Let Mobile Connector cool to resume charging
What this alert means:
Charging has been interrupted because the Mobile Connector has detected a high temperature inside its control box
housing.
What to do:
Make sure the Mobile Connector is not covered by anything, and that there is no heat source nearby. If the problem
persists in normal ambient temperatures (under 100°F or 38°C), service is required.
262
Maps and Navigation on page 154
Maps and Navigation on page 154
for more
product's
for more
product's
Owner's Manual