Tesla CYBERTRUCK Owner's Manual page 265

You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can
be located through the map on your vehicle's touchscreen display. See
details.
For more information on troubleshooting Mobile Connector status lights and charging issues, refer to the
owner's manual.
UMC_a008
Unable to charge - Wall plug temperature high
Wall outlet and wiring inspection recommended
What this alert means:
High temperature detected by Mobile Connector alerts indicate the outlet used to charge is becoming too warm, so
charging has stopped to protect the outlet.
This does not indicate an issue with your Mobile Connector or vehicle, but instead points to an issue with the wall
outlet / electrical installation the Mobile Connector is connected to.
A warm outlet may be caused by a plug that is not fully inserted, a loose building wiring connection to the outlet, or
an outlet that is beginning to wear out.
What to do:
Make sure your adapter is fully plugged into the outlet. If charging speed does not return to normal, contact an
electrician to inspect the outlet and building wiring connections to the outlet and complete any repairs needed.
If the outlet is worn, it should be replaced with a high-quality outlet. Consider upgrading to a Tesla Wall Connector
for greater convenience and highest charging speed.
UMC_a009
Cannot charge - Charge handle temperature high
Check charge handle or charge port for debris
What this alert means:
Charging has been interrupted because the Mobile Connector has detected a high temperature in the charge handle
that connects to your vehicle's charge port.
What to do:
Make sure the Mobile Connector is fully inserted into your vehicle's charge port inlet.
Inspect the charge port inlet and the Mobile Connector handle for any obstructions or moisture. Make sure any
obstruction in the charge port or Mobile Connector handle has been removed and any moisture has been allowed to
dry, then try re-inserting the Mobile Connector handle into the charge port.
Also make sure the charge handle of the Mobile Connector is not covered by anything, and that there is no heat
source nearby.
If the alert persists in normal ambient temperatures (under 100°F or 38°C), and occurs during multiple charging
attempts, this may indicate a condition affecting the Mobile Connector or your vehicle. It is recommended that you
schedule service at your convenience.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can
be located through the map on your vehicle's touchscreen display. See
details.
For more information on troubleshooting Mobile Connector status lights and charging issues, refer to the
owner's manual.
Troubleshooting
Troubleshooting Alerts
Maps and Navigation on page 154
Maps and Navigation on page 154
for more
product's
for more
product's
263