Tesla CYBERTRUCK Owner's Manual page 48

Child Safety Seats
Before seating a child, ensure that the child restraint
system is securely installed. Grasp the front of the child
restraint system with one hand on each side, and
attempt to:
• Twist the child restraint system from side to side.
• Pull the child restraint system away from the seat.
If the child restraint system moves away from the seat,
both latches are not fully engaged onto the seat's
anchor bars. You must reinstall it and try again. It is
critical that both latches on the child restraint system
are fully engaged.
WARNING: Do not use LATCH anchors with child
seats or booster seats that have an integrated
safety belt where the combined weight of the child
plus the child restraint system exceeds 65 lbs (29
kg).
Attaching Upper Tether Straps
If the child safety seat is equipped with an upper tether
strap, attach its hook(s) to the anchor point located
behind the associated rear seat. To access the center
anchor point, flip the cover upward. To access an
outboard anchor point, slide the cover to one side.
46
WARNING: Tighten upper tether straps according
to the instructions provided by the manufacturer
of the child safety seat.
For the outboard seats, position dual-strap tethers on
each side of the head support:
For the outboard seats, position single-strap tethers on
the outside of the head support:
Owner's Manual