Tesla CYBERTRUCK Owner's Manual page 32

Keys
To use a key card to unlock or lock Cybertruck from
outside, position the card as shown and tap it against
the card reader located approximately one third the way
up of the driver's side door pillar. When Cybertruck
detects the key card, the exterior lights flash, the mirrors
unfold or fold (if Fold Mirrors is on), the horn sounds (if
Lock Confirmation Sound is on), and the doors unlock or
lock. You may need to hold the key card against the
transmitter for a few seconds.
Once inside, power up Cybertruck by pressing the brake
pedal within two minutes of scanning the key card (see
Starting and Powering Off on page
longer than two minutes, you must re-authenticate by
placing the key card near one of the card readers
located on the wireless phone chargers on the center
console. When your key card is detected, your two-
minute authentication period restarts.
30
NOTE: If enabled, Walk-Away Door Lock (see
Away Door Lock on page
walk away using a phone key. When you walk away
carrying your key card, Cybertruck does not
automatically lock.
Managing Keys
To display a list of all keys that can access Cybertruck,
touch Controls > Locks. An icon displays next to each
key to indicate whether the key is a phone key or a key
card. Use this list to manage keys that have access to
Cybertruck. To add or delete keys, see
the Touchscreen on page
Cybertruck supports up to 19 keys. When you reach this
73). If you wait
limit, you must delete a key before adding a new one.
NOTE: You can use the same key for more than one
Tesla vehicle. This prevents you from having to deal with
multiple keys when you switch vehicles. If you customize
the name of an authenticated key card on one vehicle
(by touching the pencil icon), any other vehicle to which
the key card is authenticated also displays the changed
name.
Adding Keys from the Touchscreen
If you have a key card that is already paired with your
vehicle, you can pair a new key using the touchscreen.
1. On the touchscreen, touch Controls > Locks > Keys >
2. Scan your key card on one of the card readers
3. Scan a key card that has already been paired to the
33) operates only when you
30.
Add Key.
located on the wireless phone chargers on the center
console.
vehicle to confirm new key pairing.
Walk-
Adding Keys from
Owner's Manual