Tesla CYBERTRUCK Owner's Manual page 47

3. Allow the seat belt webbing to retract, and remove all
slack while firmly pushing the child safety seat into
the seat.
4. Once all slack has been removed, forcefully pull the
seat belt webbing to confirm that the automatic
locking retractor is engaged.
NOTE: The automatic locking retractor disengages
only after unbuckling and fully retracting the seat
belt webbing. Once disengaged, the belt must be
fully extended to re-engage the locking mechanism.
5. Attach the child safety seat's upper tether strap(s) (if
equipped), as required by the manufacturer of the
child safety seat (see Attaching Upper Tether Straps
on page 46).
Installing LATCH (ISOFIX) Child
Seats
Lower LATCH anchors are provided in all rear seating
positions. The anchors are located between the seat's
back rest and cushion. The exact location of each anchor
is identified by a child safety seat identification label.
The label is located on the seat back, directly above its
associated anchor.
Seating and Safety Restraints
Child Safety Seats
Carefully read and follow the instructions provided by
the manufacturer of the child restraint system. The
instructions describe how to slide the child restraint
system onto the seat's anchor bars until you hear it
"click" into place. You may need to push the child
restraint system firmly against the seat back to ensure it
fits snugly.
Adjust until the child restraint system is fitted firmly
against the seat back. Ensure the child restraint system
fits snugly.
45