Upper/Lower Control Arm Removal; Upper/Lower Control Arm Installation - Polaris 600 RUSH 2010 Manual

Steering and Suspensions

Upper/Lower Control Arm Removal

1. Remove ski assembly and spindle.
2. Remove the sway bar link fastener.
3. Remove the shock from the lower control arm.
4. If removing the upper control arm, remove the four
lock nuts that secure the pivot shafts to the bulk head.
5. If removing the lower control arm, remove the four lock
nuts that secure the pivot shafts to the bulk head. Note
that the forward fastener location is a bolt with nut.
8.34

Upper/Lower Control Arm Installation

1. If replacing the pivot shafts, bushings, or rod ends,
install the new parts. Reference the appropriate
component assembly views for correct orientation of
washers and bushings.
• Lower Control Arm
• Fixed Camber Upper Control Arm
• Adjustable Camber Upper Control Arm
2. If replacing the spherical bearing, reference Spherical
Bearing Replacement procedure.