Variable Exhaust System (Ves)-Threaded Valve - Polaris 600 RUSH 2010 Manual

Variable Exhaust System (VES)-Threaded Valve

EV CAP
A
A
EV Cap Screws (A): 10.5-13.5 ft-lbs (14.3-18.3 Nm)
Apply Loctite® 242™ to cylinder screws.
Cap Nut (B): 14-18 ft-lbs (19.1-24.5 Nm)
Apply Loctite® 242™ to threads.
Assembly Notes:
• Replace spring if rusted, bent, or distorted
• Inspect bellows for tears.
• Inspect guillotine threads and cap nut threads for
wear/galling. Replace parts as required.
• Discard gasket. Replace with new parts during
assembly.
• Clean components as outlined in Chapter 2-
Maintenance.
SPACER
CAP NUT
B
SPRING
BELLOWS
= T
Engine/Cooling/Exhaust
GUILLOTINE
GASKET
EV BASE
3
3.53