Table of Contents
Advertisement
RMK/PRO Ride RMK 155/163 Rail Fastener
Locations
A
C
D
B
E
LEFT RAIL SHOWN
NOTE: 163 Rail Shown. 155/155 Assault Similar
Components/Fasteners:
• A - Rail Tip
• B - Limiter Strap Shaft
• C - Rail Bumper
• D - Bogie Wheel Asm. (Mount to outside of rail)
• E - Front Shock Shaft
• F - Scratchers (Optional on 800 RMK)
• G - Front Torque Arm Shaft/Screw
• H - Bogie Wheel Asm. (Standard on 800 RMK.
Optional for all other models. Mount to inside of
rail on all models except for 800 RMK Assault)
• I - Rail Bumper
• J - Rail Brace Shaft/Screws (Standard on 800
RMK Assault)
• K - Bogie Wheel Asm. (Standard on 800 RMK.
Optional for all other models. Mount to outside of
rail)
• L - Rear Scissor Shaft/Screw
• M - Rail Brace Shaft/Screws
• N - Rear Idler Adjuster Block
IMPORTANT: RMK Assault Models - If installing
accessory bogie wheels, the wheels MUST be
installed on the outside of the rails at location (H) and
the scratchers must be removed.
Damage to the front track shock reservoir will occur if
the accessory bogie wheels are installed on the inside
of the rail.
G
H
F
Steering and Suspensions
K
I
J
L
N
M
8.67
8
Advertisement
Chapters
Table of Contents
Troubleshooting
