Indy 121 Conventional Front/Rear Torque Arm - Polaris 600 RUSH 2010 Manual

INDY 121 Conventional Front/Rear Torque Arm

A
C
C
O-RING
LIMITER STRAP
STANDARD FASTENERS
A: 60 ft-lbs (81 Nm)
B: 50 ft-lbs (68 Nm)
C: 12 ft-lbs (16 Nm)
D: 35 ft-lbs (47.4 Nm)
Assembly Notes
• Never re-use lock nuts. Always replace with new parts.
• All pivots must rotate freely after tightening fasteners.
CAUTION
Some rail shaft fasteners are pre-coated with locking
agent. Never re-use these fasteners once removed.
Always use new pre-coated fasteners.
FRONT TORQUE ARM
SHAFTS
WASHER
A
INNER SHAFT
BUSHINGS
D
SHOCK ROD
INSTALL PLATE POINTED DOWN
= T
Steering and Suspensions
D
D
SPACER
CARRIER WHEEL
WASHER
SLEEVE
BUSHING
TORSION SPRING
FLANGE SHAFT
REAR PIVOT
INNER SHAFT
CLIP
SPRING ADJUSTER
A
B
BUSHING
ARM
8.39
8